Forum Discussion

Occasional Contributor

2 years ago

Custom linux image build failure for Arri10 SoC development kit

Hi, I am following the below documentation to build my custom Linux image for Arria10 SoC development kit. While building Yocto Rootfs, I am facing oe_runmake error. I have attached the log as wel...

error_log_bitbake.txt60 KB

Board Debug

tehjingy_Altera

Regular Contributor

2 years ago

Are you following the steps from rocket board below?

https://www.rocketboards.org/foswiki/Documentation/Arria10SoCGSRD

Have you made changes to the original branch? Because by default the linux branch it is supposed to use is socfpga-6.1.68-lts

Regards

Jingyang, Teh

Forum Discussion

Custom linux image build failure for Arri10 SoC development kit

Recent Discussions

intel_onchip_Memory II RAM: r/w doesn t work from FPGA but from HPS

Power Rating Required for RZQ Resistor on Cyclone V SE

MAX 10. No 3.0 V Schmitt Trigger I/O standard

Arria 10: Remote Update may brick FPGA and Factory Fallback won't work

Unable to program EPCQ16A on custom cyclone IV board - error during jic flashing.