Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Clock recovery from signle 125MHz pulses with PLL

Hi, I have a circuit that uses one PLL to recover data and clock from a single bitstream. This PLL is fed with 125 MHz clock, on it's output there is 375 MHz clock (which is used for the circuity ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Hi FvM,

The Clock and Data Recovery works fine, perhaps it's not done with best practises but it works with no problems.

I have the question about pulses that are generated from this data (their source doesn't really matter) -> can i recover a clock from pulses occuring approx. every (1/44100)s.

best regards

madness