Forum Discussion

New Contributor

2 years ago

Chip ID Reading using AVST Mailbox IP in Agilex

hi, We are debugging the acceleration board of agilex and want to get the chip id of the board. But when adding Mailbox IP to the project, many errors occurred in the synthesis. Our project can...

Programmable Logic Device

KellyJialin_Goh

Frequent Contributor

2 years ago

Hi,

You may have a look at this document to have the host IP communicate with the Mailbox Client IP with the input commands from Figure 2 to request chip ID without connecting using signal tap: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-avst-client-ag.pdf

Looking forward to your feedback whether it works from your end.

Thank you.

Regards,

Kelly

Forum Discussion

Chip ID Reading using AVST Mailbox IP in Agilex

Recent Discussions

Will serialization factor of 6 in LVDS serdes IP be supported in the future on Agilex5?

System PLL of Agliex5 PCIE example design cannot be locked after configuration

JTAG Chain Broken on Agilex 7-I Dev Kit

Request for Cyclone V Pinout File Information

Cyclone 10 LP's Extended Industrial parts