Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

can't scan jtag chain in customer built board

I have a custom built board with EPM570T100C3N, this is the only programmable device in the board. The other chip is a CY68013A. The USB part of the board works well, but the CPLD cannot programmed b...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

After check the "enable real-time ISP", I can programming the device. It is really strange. I don't know why the programming will fail continuously if "enable real-time ISP" were not checked.

:)