Forum Discussion

APPU_appu's avatar
APPU_appu
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Can't configure device. Expected JTAG ID code 0x02E660DD for device 1, but found JTAG ID code 0x020A

Hii @JohnT_Intel @Altera_Forum @Scott @gusemery Arria A10 board = 10AX115S2F45I1SG Error(209015): Can't configure device. Expected JTAG ID code 0x02E660DD for device 1, but found JTAG I...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,


I suspect that you have 2 device on your JTAG chain where you accidentally loading Arria 10 bitstream into Max V device.


The reason is JTAG ID 0x020A40DD is 5M1270Z device. Could you try to performed Auto-detect to see if the JTAG chain match on the programming chain you are using?


  • APPU_appu's avatar
    APPU_appu
    Icon for Occasional Contributor rankOccasional Contributor
    4 years ago

    Hi @JohnT_Intel

    yes I gave auto detect but i am not able to find the jtag chain.

    Can you tell me for loading .jic, what is the MSEL switch position and for loading .sof what is the MSEL

    switch position.

    Thanks

    Ashwi