Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

C3 AS configuration problem

I used one EP3C16F484I7 and one EPCS16I8N in my design. I just designed JTAG interface on my board. I can download .sof file to the FPGA and it works well. I can also download .jic file to the EPCS16...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

MSchmitt,thanks for your reply!

I tried to connect the nCE to GND using a jumper, it still doesn't work.

I inspected that the nSTATUS never go high after power up or during reconfiguration.

I also inspected that the nSTATUS always remain low during configure the FPGA through JTAG.

Any other suggestions?

I have no idea about it now! help me please.