Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

bemicro MAX 10 board time constraint

am working on adding the SLS SD/eMMC card adapter to my BEMICRO MAX 10 board, the tutorial was originally written for cyclone III... Was wondering if anyone knew if the timings had to change heres...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Is the frequency of the clock driven into the BeMicro board's 'osc_clk' pin the same as it was on the Cyclone III solution? - i.e. 48MHz. If so, the constraints look fine.

Cheers,

Alex