Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Basic question

HI

I am beginner using Altera. I am trying to launch The hello world into DE2 (Cyclone II)

after loading The blaster driver and choosing the proper file *.sof I have been unable to read this two words(Hello world) into the display: I get a message :

Pausing target processor:not responding

Resetting and trying again : Failed

Leaving target processor paused

The 7 segment display shows only some segment ON and the blue leds are On the green ones are OFF on the board.

Does anyone know whats going on?

I would appreciate any help.

Regards

FRR

2 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    Can i use Quartus 7.2 and Nios 7.2 Web edition with Open Core plus evaluation (no license) ?

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    Quartus II v7.1 and v7.1 Service Pack 1- Critical Issue Advisory

    Important Critical Issue Notice for all Quartus II software version 7.1 and 7.1 Service Pack 1 designs using the OpenCore Plus feature to evaluate intellectual property (IP), including the Nios® II processor, instead of a full license for the IP core.

    http://www.altera.com/support/kdb/solutions/rd07272007_148.html

    This patch should solve this issue.