Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

basic problem with cycloneiii

I have a ep3c40q240c8.i can configure it from jtag and also program it's epcs16 and verifiy it.but the fpga after configuration have no effect.for example all pins are 1;no output affected by input;n...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

thanks for reply.

my quartus is version 8.0. and it's programming file for epcs16 is *.pof.

regards