Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

AS configuration with SPANSION SPI flash

Hello, I try to program my Cyclone III (EP3C16) though AS configuration. I do not used EPCS but a SPANSION S25FL016A0LMFI001 which have the same Silicon ID than the EPCS16 (14h) and with the s...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

I am using the JTAG indirect method with the Quartus II programmer (used in AS mode) with USB blaster connecting to the JTAG port of the FPGA.