Forum Discussion

TG_GER's avatar
TG_GER
Icon for New Contributor rankNew Contributor
2 years ago

arria10 u-boot from sd card with early release

Hi, I am currently working with an Arria 10 board utilizing U-Boot and Yocto on an SD card. Presently, the device successfully boots with a full FPGA configuration and an autobootscript from U-Boot....
Configuration
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi


Any update on this case?

Is the remote boot what you are looking for?


Regards

Jingyang, Teh


TG_GER's avatar
TG_GER
Icon for New Contributor rankNew Contributor
2 years ago

Hello,

I hope this message finds you well. I apologize for my absence as I was on holiday, but I am now back and ready to resume work.

I have already reviewed the page you mentioned.

My initial focus is on manually configuring the core FPGA from the SD Card using the u-boot Command Line Interface (CLI).

Once I confirm the success of this step, I will proceed to the second phase, which involves implementing the download from TFTP.

Unfortunately, I have not made any progress yet.

It consistently freezes during the loading of the core configuration into the FPGA.

I have confirmed that the core configuration is fully present in the RAM by extracting the hex data from the RAM.

Any insights or guidance on resolving this issue would be greatly appreciated.

Thank you for your assistance.