Forum Discussion
smile123
Occasional Contributor
Occasional Contributorarria 10 program：Flash Loader IP not loaded on device 1
hi,everyone,now i have encountered some issues regarding solidifying the program on Arria 10 into MT25QU256. 1、i have a boot on stm32,there have power-on sequence： 1>0.9V，0.95V ，Power on the...
FakhrulA_altera
Regular Contributor
Regular ContributorHi smile123,
Please check on this KDB, it might be applicable to your case:
- When trying to program an EPCS device with a JIC file using Quartus II software why do I get a "Flash Loader IP not loaded on device 1" error message?
- Error (209062): Flash Loader IP not loaded on device 1
As for changing the USB-Blaster clock, refer to this: How do I change the clock frequency of the USB-Blaster II download cable?
Regards,
Fakhrul
