Forum Discussion
andyLA
New Contributor
New ContributorArria 10 Passive Serial Configuration Error
We have two PCB designs with Arria 10 FPGAs on then and in both designs we are able to program the devices using the byte blaster 2 cable over JTAG, but on both boards programming over passive serial...
YuanLi_S_Intel
Regular Contributor
Regular ContributorHi Andy,
The only way is to find out the JTAG pin in your microcontroller as shown in the user guide:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max2/max2_mii51015.pdf (Page 2)
