Forum Discussion

nelky's avatar
nelky
Icon for Occasional Contributor rankOccasional Contributor
2 years ago

Agilex 7 interface with DDR4

Hi experts, I am using Agilex 7 (AGFB022R25A2I3V). I wish to use the internal bridges to write to and read from DDR4. My idea is like this,... Build a internal connections using Platform Designer...
Board Debug
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi

You could luanch the emif debug toolkit from the quartus tool.

Seen below:

Regards

Jingyang, Teh

nelky's avatar
nelky
Icon for Occasional Contributor rankOccasional Contributor
2 years ago

Hi Jingyang,

Thanks for coming back.

Before I posted, I have tried the method you suggested. It can't be used since I am using Agilex, not Stratix, Arria or Cyclone. Please refer to the attached image for the error.

I have to use the System Console. But it was stuck and don't know how to proceed (you can see the attached image). I did mention about this in my previous post.

Regards