Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

address error!

I am building a SOPC system ,i add 2 pipelines which each mount a on-chip memory and a accelerator .I used "Auto-Assign Base Addresses",but there is a error : Error:Onchip_mem.s1:Appears at more t...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Hi,

check your connection in SOPC Builder, probably onchip_mem is connect to too other components!

Regards

Luca