Forum Discussion

YTsuj6's avatar
YTsuj6
Icon for New Contributor rankNew Contributor
6 years ago

About pin processing of unused input pins for Cyclone V.

FPGA:Cyclone V (5CEBA7F23C7N) Can I use the input setting IO pin in the open state when it is not used? There is a model where the FPGA circuit is common and the external circuit is different, so t...
ShafiqY_Intel's avatar
ShafiqY_Intel
Icon for Frequent Contributor rankFrequent Contributor
5 years ago

Hi YTsuj6,

The Unused Pins must connect as defined in the Quartus Prime software.

Below are the options for unused pins:

Thanks