Forum Discussion

Occasional Contributor

6 years ago

What is JTAG Debug Level 3 for Nios II?

Hello everyone, I would like to trace program execution on the Nios II. One way - to buy Lauterbach - not interesting. Second way - use SignalTap II and .objdump file - pretty well, but still. And n...

Ahmed_H_Intel1

Frequent Contributor

6 years ago

I think you already mentioned using SignalTap II and .objdump file, Can you give more description?

dsmirnov

Occasional Contributor

6 years ago

Yes, but saying in advance - by using SignalTap I do not need even Debug to be turned on, so the settings for trace is for something another.

I used this manual: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an446.pdf

But since it is only from 2011 I haven't found any information if it is nios trace replacement, and this analysis is not very good for tracing

Forum Discussion

What is JTAG Debug Level 3 for Nios II?

Recent Discussions

DE10-Lite unable to flash?

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

About PCIe Daughter Cards for Agilex™ 3 FPGA and SoC C‑Series Development Kit

Available replacement for the discontinued P/N: MK-A5E065BB32AES1 ?