Forum Discussion

druva1's avatar
druva1
Icon for Occasional Contributor rankOccasional Contributor
3 years ago
Solved

warning 18584 There are no transceivers channels used in the design

Hi, I have an Arria 10 (10AX027H4F34E3SG) PC: Windows 10 - Quartus standard 20.1.10.711 -Quartus Pro 21.1.0.169 In both softwares, I get similar warnings: Warning (18584): There are no...
  • Kshitij_Intel's avatar
    Kshitij_Intel
    3 years ago

    Hi,


    I have compiled your design in quartus pro v21.1 and the warning is clear "Warning(18584): There are no transceiver channels used in the design. You must use or instantiate at least 1 transceiver channel to preserve the rest of the unused channels". You need to instantiate minimum 1 transceiver channel with fPLL and reset controller. This should resolve your problem. Please let me know if you still face any issues.


    Thank you

    Kshitij Goel



Kshitij_Intel's avatar
Kshitij_Intel
Icon for Frequent Contributor rankFrequent Contributor
3 years ago

Hi,


I have compiled your design in quartus pro v21.1 and the warning is clear "Warning(18584): There are no transceiver channels used in the design. You must use or instantiate at least 1 transceiver channel to preserve the rest of the unused channels". You need to instantiate minimum 1 transceiver channel with fPLL and reset controller. This should resolve your problem. Please let me know if you still face any issues.


Thank you

Kshitij Goel