Forum Discussion

pknbanzai's avatar
pknbanzai
Icon for New Contributor rankNew Contributor
2 years ago

tse ethernet HW transmit issue

Greetings, I have a tse ethernet block implemented in a design, and can only get a 1-word and 2-word read to transmit to the computer. I'm using Wireshark to capture packets. I also have the ethe...
ZiYing_Intel's avatar
ZiYing_Intel
Icon for Frequent Contributor rankFrequent Contributor
2 years ago

Hi,


We need below information to check


  • TSE IP register setting and status (before/after sending packet from user side)
  • SignalTap waveform when customer is sending packets at the TSE IP input/output ports
  • How user change AVMM I/F bus width from 32bits to 8bits

Best regards,

zying