Forum Discussion

New Contributor

3 years ago

stratix V dsp development kit and ethernet 1G

Hello, does anybody already experienced using the ethernet 1G port on the stratix V dsp dev kit? This kit uses marvell 88E1111 phy connected to fpga using SGMII. Is there any reference design avai...

paveetirrasrie_Altera

Frequent Contributor

3 years ago

Hi Michel Delmas,

We do have a reference design but its targeted 40Gbps ethernet.

https://www.intel.com/content/www/us/en/design-example/714409/stratix-v-40gbps-ethernet-macphy-ip-hardware-demo-design-using-qsfp.html

You may also refer link below for more detail info about the devkit and its User guide on how to test the board.

https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/stratix/v-gs.html#

Regards,

Pavee

Forum Discussion

stratix V dsp development kit and ethernet 1G

Recent Discussions

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector