Forum Discussion

Occasional Contributor

4 years ago

Sof2Flash conversion for Ethernet downloading on Arria 10

Hi, I encountered Sof2Flash conversion error as shown below. Subsequently, I read that Arria 10 is not supported. If so, how do I convert a SOF file to FLASH file for ethernet downloading on Arri...

aikeu

Regular Contributor

3 years ago

Hi RyanT,

I afraid the project files that you flash/overwrite the original content of the board does not have the feature to support ethernet download.

Try to perform a Factory Reset and check the condition of the ethernet download on default factory settings before any attempt to flash any new files:

https://www.intel.com/content/www/us/en/docs/programmable/683526/current/connecting-to-the-board-update-portal.html

Thanks.

Regards,

Aik Eu

Forum Discussion

Sof2Flash conversion for Ethernet downloading on Arria 10

Recent Discussions

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector