Forum Discussion

Occasional Contributor

4 years ago

Sof2Flash conversion for Ethernet downloading on Arria 10

Hi, I encountered Sof2Flash conversion error as shown below. Subsequently, I read that Arria 10 is not supported. If so, how do I convert a SOF file to FLASH file for ethernet downloading on Arri...

aikeu

Regular Contributor

4 years ago

Hi RyanT,

You can refer to this KDB for the workaround:

https://www.intel.com/content/www/us/en/support/programmable/articles/000077309.html

Thanks.

Regards,

Aik Eu

Forum Discussion

Sof2Flash conversion for Ethernet downloading on Arria 10

Recent Discussions

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector