Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Sending data from Cyclone V FPGA to PC through USB Blaster

Hi All, I have a cyclone V Soc Development kit which has an on board USB blaster II comprising of MAX II and Cypress USB driver CY7C68013A. I would like to transmit data through the USB dri...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Thanks Dave I intend to communicate through the dedicated USB lines in the MAX II and not the JTAG lines. Is there any code for configuring from the host(PC) in order to facilitate the USB data transmission from PC to FPGA and vice versa, by configuring the MAX II(USB BLaster II) or should the MAX II firmware be modified.

Thanks,

Gowtham