Forum Discussion

Nidhi_Gupta's avatar
Nidhi_Gupta
Icon for New Contributor rankNew Contributor
3 years ago
Solved

Running BTS on Stratix 10 SX development board

I want to run the default program (BTS) which is part of the dev board's package installer. This program is not able to load, and connect to the System Console server. It seems it is trying to search...
  • AR_A_Intel's avatar
    AR_A_Intel
    3 years ago

    Hello

    Welcome to INTEL forum. Upon checking, the Quartus version supported for BTS test is v18.0 b184. Could you help check on this?

    The manufactured board’s BTS was built with Quartus version 18.0 b184. and the error you get possibly caused by the difference in system console of different Quartus revisions. We strongly recommended to use the right Quartus version as it was tested. Thanks


Farabi_Altera's avatar
Farabi_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hello,


I am sorry to hear that you have difficulties with BTS.

First debug step to make sure your connection from your laptop to board is good.

-> can you program any simple design through the Quartus programmer?

without using BTS to program the device.


regards,

Farabi


  • Nidhi_Gupta's avatar
    Nidhi_Gupta
    Icon for New Contributor rankNew Contributor
    3 years ago

    I tried to program the FPGA device using programmer. But the .sof file's device, and JTAG chain devices are not matching. The .sof generated by an example design (I used bts_config.sof from installer package of the development board ) includes FPGA only.

    I see two devices in the JTAG chain with the switch settings recommended for Stratix S10 board . How to bypass the 10M50DA?

    1: /devices/10M50DA(.|ES)|10M50DC@2#USB-1#Stratix 10H SoC Dev Kit

    2: /devices/1SX280HN2S2@1#USB-1#Stratix 10H SoC Dev Kit