Forum Discussion

Nidhi_Gupta's avatar
Nidhi_Gupta
Icon for New Contributor rankNew Contributor
3 years ago
Solved

Running BTS on Stratix 10 SX development board

I want to run the default program (BTS) which is part of the dev board's package installer. This program is not able to load, and connect to the System Console server. It seems it is trying to search...
  • AR_A_Intel's avatar
    AR_A_Intel
    3 years ago

    Hello

    Welcome to INTEL forum. Upon checking, the Quartus version supported for BTS test is v18.0 b184. Could you help check on this?

    The manufactured board’s BTS was built with Quartus version 18.0 b184. and the error you get possibly caused by the difference in system console of different Quartus revisions. We strongly recommended to use the right Quartus version as it was tested. Thanks


AR_A_Intel's avatar
AR_A_Intel
Icon for Super Contributor rankSuper Contributor
3 years ago

Hello

Welcome to INTEL forum. Upon checking, the Quartus version supported for BTS test is v18.0 b184. Could you help check on this?

The manufactured board’s BTS was built with Quartus version 18.0 b184. and the error you get possibly caused by the difference in system console of different Quartus revisions. We strongly recommended to use the right Quartus version as it was tested. Thanks


Nidhi_Gupta's avatar
Nidhi_Gupta
Icon for New Contributor rankNew Contributor
3 years ago

Hello

I could un-install 22.1 and install 18.0. BTS displays the JTAG chain with following devices:

1: /devices/10M50DA(.|ES)|10M50DC@2#USB-1#Stratix 10H SoC Dev Kit

2: /devices/1SX280HN2S2@1#USB-1#Stratix 10H SoC Dev Kit

However, when I try to download image file/s, I am getting following screen with error related to target device:

I have installed the Quartus version with Stratix 10 support. I tried various image files which comes with devkit installer.