Forum Discussion

huan_wang's avatar
huan_wang
Icon for New Contributor rankNew Contributor
3 years ago

MAX10M08scu169 1.8V LVDS

I have some problems when using 10M08. I would like to ask you about it. I need to use 1.8V LVDS. I see that the manual says that 10M08SCU169 supports 1.8VLVDS, but it also says that 1.8VLVDS only su...
AqidAyman_Altera's avatar
AqidAyman_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hello,


Thank you for reaching out Intel FPGA Community.

Yes, as mentioned in the Intel® MAX® 10 General Purpose I/O User Guide, 1.8V LVDS only support in dual supply devices.


For your device, 10M08SCU169, it is a single supply device indicates from the letter "SC". You can always refer the ordering information from the link below:

https://www.intel.com/content/www/us/en/docs/programmable/683658/current/device-ordering-information.html


Thanks,

Aqid


  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    3 years ago

    Snapshot from Intel® MAX® 10 General Purpose I/O User Guide