Forum Discussion

sakthi_iitm's avatar
sakthi_iitm
Icon for New Contributor rankNew Contributor
4 years ago

MAX10 ADC Sequencer problem

I am using MAX10 internal ADC with Channel 1 and Channel 2. In the platform designer I have invoked ADC control core only (Soft IP) and now I want to change the ADC command channel ( Between channel ...
Ash_R_Altera's avatar
Ash_R_Altera
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,

You can generate ADC IP with sequencer logic which adds additional blocks to the control only core. Other option is to check for an example design on Intel FPGA design store: FPGA Design Store | Intel


Regards