Forum Discussion

AdamStone's avatar
AdamStone
Icon for New Contributor rankNew Contributor
5 years ago

MAX 7000 Read/Write Program

I'm trying to get set up for programming Max 7000 CPLDs as well as reading the program from them. The specific IC is the EPM7128A. As far as I can tell I need a cable, adapter, and software. The adap...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


Just would like to check if the max is a development kit of a raw device which you will be embeded on a board?


So to program the MAX, you need USB Blaster II Cable (Cable) and Quartus Prime software, i am attaching the link for your reference:

USB Blaster:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf


Quartus:

https://www.intel.com/content/www/us/en/software/programmable/quartus-prime/download.html


AdamStone's avatar
AdamStone
Icon for New Contributor rankNew Contributor
5 years ago

@YuanLi_S_Intel Yes I will be programming this device and installing it on a board. If possible I also need to read the program from these.