Forum Discussion

ericmtzr's avatar
ericmtzr
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

MAX 10 FPGA - power supply with plateau

We are using the MAX 10 FPGA and came across an ominous message in the configuration guide regarding monotonic power ramp. Here is the statement in the m10_datasheet-683794-666319.pdf: Recommended...
Farabi_Altera's avatar
Farabi_Altera
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hello,

The impact if the power ramp up is not monotonous is POR circuit will not release the device out from reset mode to enter next mode which is configuration mode.

If device in reset mode, it will keep redoing the power cycle until the power ramp up is monotonous.

regards,
Farabi