Forum Discussion

Ham1's avatar
Ham1
Icon for New Contributor rankNew Contributor
4 years ago

FPGA communicating with H-Bridge

Hi all, I have a Cyclone V De0-Nano-SoC board and a multi motor h-bridge that works fine with an Arduino, but doesn't want to communicate with the fpga. I want to start out by controlling one DC...
IntelSupport's avatar
IntelSupport
Icon for Contributor rankContributor
4 years ago

Hello Ham1,


First of all, we recommend to verify the signals with Signal Tap Logic Analyzer compared to your expected signals.


If you aren't familiar with Signal Tap Logic Analyzer, please see the following materials.


5. Design Debugging with the Signal Tap Logic Analyzer

https://www.intel.com/content/www/us/en/docs/programmable/683552/18-1/design-debugging-with-the-logic-analyzer-69524.html


SignalTap II Logic Analyzer: Introduction & Getting Started

https://www.youtube.com/watch?v=RtPqQ25hSIk


Thanks