Forum Discussion

app_engineer's avatar
app_engineer
Icon for New Contributor rankNew Contributor
4 years ago

Error (18948): Error message received from device: Bitstream error. (Subcode 0x0001, Info 0x00000003

While trying to program the board: 1) USB-BlasterII [1-2.3] C32250DD 1SG280HH1(.|S3|AS|BK)/.. I am getting an error in quartus programmer: Error (18950): Device has stopped receiving conf...
Ash_R_Altera's avatar
Ash_R_Altera
Icon for Regular Contributor rankRegular Contributor
4 years ago

The SDM (Secure Device Manager) is not for user assignable logic. It is used for configuring the FPGA. This Stratix 10 device is a Smart VID device, which gets voltage supply from a PMBUS complaint power regulator.

It interacts with the regulator after power up and before configuration. For this operation to happen correctly, you need to assign the pins correctly. Please refer below link:

https://www.intel.com/content/www/us/en/docs/programmable/683418/21-1/specifying-parameters-and-options.html


Regards