Forum Discussion

JensVkb's avatar
JensVkb
Icon for Occasional Contributor rankOccasional Contributor
3 years ago
Solved

Does the onchip flash IP block take physical degradation into account?

To support remote updating of my MAX10M08 device, I'm using the onchip flash IP block to access the CFM to erase sectors and program the new configuration. From the user manual https://www.intel.co...
  • ShengN_altera's avatar
    ShengN_altera
    3 years ago

    Hi FvM,


    Thanks for your sharing. Can't deny that readback and compare will be a good measure to ensure data correctness.


    What I mentioned previously is just the ws (write successful) and es (erase successful) bits will always show '0' (failed) if the physical memory could not execute the Write or Erase operations properly.


    Thanks,

    Best Regards,

    Sheng

    p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.


ShengN_altera's avatar
ShengN_altera
Icon for Super Contributor rankSuper Contributor
3 years ago

Hi FvM,


Thanks for your sharing. Can't deny that readback and compare will be a good measure to ensure data correctness.


What I mentioned previously is just the ws (write successful) and es (erase successful) bits will always show '0' (failed) if the physical memory could not execute the Write or Erase operations properly.


Thanks,

Best Regards,

Sheng

p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.