Forum Discussion

DGaik's avatar
DGaik
Icon for New Contributor rankNew Contributor
6 years ago

Dear, On the KIT MAX R 10 10M08 Eval Kit Board is it possible change the voltage of the regulator EP5388QI from 3.3V to 2.5V? The VCC_CORE can be 2.5V for the proper operation? I not using the Arduino or Opamps circuits from this board.

MAX R 10 10M08 Eval Kit Board
DGaik's avatar
DGaik
Icon for New Contributor rankNew Contributor
6 years ago

Dear,

Thank You. Also, if You know another FPGA development Board that can support dual voltage supply let me know.

For the moment i will go with this solution.

Best regards,

Daniel.

  • AnandRaj_S_Intel's avatar
    AnandRaj_S_Intel
    Icon for Regular Contributor rankRegular Contributor
    6 years ago

    Hi Daniel,

    I can't find any ​ FPGA development Board that can support dual voltage supply.

    Regards

    Anand