Forum Discussion

Tvann's avatar
Tvann
Icon for New Contributor rankNew Contributor
3 years ago
Solved

Cyclone II FPGA - Status for when it will be manufactured again

We are very concerned about the status for the Cyclone II FPGA, part# EP2C20F484C8N. This FPGA is the heart of our FasTrak2 high speed data acquisition board. We were told that Intel temporarily st...
  • FakhrulA_altera's avatar
    FakhrulA_altera
    3 years ago

    Hi Tvann,


    I have checked with our representative, and from the feedback I received, could you please check with the distributor again?

    According to him, there should be a lead time starting last week (Cyclone II will turn off HA starting from WW49.1).


    Regards,

    Fakhrul


FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi Tvann,


I have checked with our representative, and from the feedback I received, could you please check with the distributor again?

According to him, there should be a lead time starting last week (Cyclone II will turn off HA starting from WW49.1).


Regards,

Fakhrul


  • Tvann's avatar
    Tvann
    Icon for New Contributor rankNew Contributor
    3 years ago

    Thank you Fakhrul, I appreciate it! I will contact our Distributors to make sure they are now accepting orders for the Cyclone II.

    Take care,

    Tom

  • tvann5752's avatar
    tvann5752
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hi Fakhrul,

    We have checked with all of the Intel Distributors. None of the distributors are accepting orders for the Cyclone II FPGA. This FPGA has not been manufactured for a couple years. This is highly unusual to stop accepting orders without any explanation.

    Best regards,

    Tom