Forum Discussion

Tvann's avatar
Tvann
Icon for New Contributor rankNew Contributor
3 years ago
Solved

Cyclone II FPGA - Status for when it will be manufactured again

We are very concerned about the status for the Cyclone II FPGA, part# EP2C20F484C8N. This FPGA is the heart of our FasTrak2 high speed data acquisition board. We were told that Intel temporarily st...
  • FakhrulA_altera's avatar
    FakhrulA_altera
    3 years ago

    Hi Tvann,


    I have checked with our representative, and from the feedback I received, could you please check with the distributor again?

    According to him, there should be a lead time starting last week (Cyclone II will turn off HA starting from WW49.1).


    Regards,

    Fakhrul


Farabi_Altera's avatar
Farabi_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hello,


Intel will release PDN (Product Discontinuance Notice) before the product will be discontinued.

link to PDN : https://www.intel.com/content/www/us/en/support/programmable/support-resources/quality/fpga-pcn-pdn-adv.html?s=Newest&f:@emtcontenttype_en=%5BProduct%20Discontinuance%20Notices%20(PDN)%5D


If there is no PDN released for this product, that means you can still order them, the only concern is due to global supply issue, the order will take some time to be delivered.


The correct way to check device availability is by contacting your local distributors :

https://marketplace.intel.com/s/pmp-partner-program/a723b0000008PICAA2/distributor


regards,

Farabi


Tvann's avatar
Tvann
Icon for New Contributor rankNew Contributor
3 years ago

Thank you Farabi.

All of our Distributors are telling us that Intel has informed them that they are still currently not accepting orders for this product. They told us that we would need to contact the manufacturer directly to find out what the status is for this FPGA. They said we needed to call (408) 765-8080. I have called that number several times and asked the operator to connect me to someone in Technical Sales or Operations who can help answer my question about when a certain chip will be manufactured again. But I have been hung up on all three times.

I would sincerely appreciate it if you could put me in touch with the appropriate person at Intel.

Thank you,

Tom Vann
President
Visi-Trak