Forum Discussion

mehta_expai's avatar
mehta_expai
Icon for New Contributor rankNew Contributor
4 years ago
Solved

cyclone 10 gx fpga

Hello,

I had downloaded Quartus prime pro and the device installation file for cyclone 10 gx.

When i have installed Quartus prime pro & started new project ,but when the board selection window is came, the selection for board is not there. So i have downloaded the board file for cyclone 10 gx from intel website.. with a name of cyclone 10 gx kit collateral.

I don't know, how to add this board file in Quartus prime software or where i have to copy this board file in main files.

  • sstrell's avatar
    sstrell
    4 years ago

    If you are saying that you have a development kit and you're not seeing the board in the New Project Wizard, I've found that few of them end up appearing there. You may have to select the device on the board and manually create I/O and other assignments. Or you can look for a project template (.par) that might be available for your board.

1 Reply

  • sstrell's avatar
    sstrell
    Icon for Super Contributor rankSuper Contributor
    4 years ago

    If you are saying that you have a development kit and you're not seeing the board in the New Project Wizard, I've found that few of them end up appearing there. You may have to select the device on the board and manually create I/O and other assignments. Or you can look for a project template (.par) that might be available for your board.