Forum Discussion

New Contributor

2 years ago

Converting .sof file to .flash file for Stratix 10 GX development kit

Hello Intel, I have the Stratix 10 GX development kit, and am needing to load a user design into the Flash for auto-configuration of the user design at power up. I've been following through the d...

EBERLAZARE_I_Intel

Regular Contributor

2 years ago

Hi Chris,

We are still working on the workaround. In the meantime, do you have your own design/project that you're working on?

Alternatively, we could recommend to you using RSU for your project, Remote System Update:

https://www.intel.com/content/www/us/en/docs/programmable/683021/22-4/use-cases-s10-fm.html

https://www.rocketboards.org/foswiki/Projects/Stratix10HPSRemoteSystemUpdate

Forum Discussion

Converting .sof file to .flash file for Stratix 10 GX development kit

Recent Discussions

Stratix 10 Development Kit HiLo connector

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

About PCIe Daughter Cards for Agilex™ 3 FPGA and SoC C‑Series Development Kit

DE10-Lite unable to flash?

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).