Forum Discussion

SSB's avatar
SSB
Icon for New Contributor rankNew Contributor
3 years ago

Connect External Arm DSTREAM Debugger and Arm Development Studio with Intel Stratix 10 SX DK

Hi all, I have my Intel Stratix 10 SX Development Kit up and running with FPGA design programmed into SDM QSPI flash via USB-Blaster II cable. U-Boot does run on the Cortex-A53 core when board boot...
SSB's avatar
SSB
Icon for New Contributor rankNew Contributor
3 years ago

Hi,

Thanks for the response. The document you mentioned above does not point on how configure the FPGA image to include the HPS into the JTAG scan chain and carry out debug via external JTAG.

Any help around that area is appreciated. At the moment, on launching a debug connection, ARM DS complains that the connected device is not recognized as a Stratix10 platform.

Thanks.