Forum Discussion

dsun01's avatar
dsun01
Icon for Contributor rankContributor
3 years ago

boardtestsystem not run

Dear Support, I installed quartus 21.3, on win10 64. I proved the usb cable is working by programming the FPGA on the A10GX dev board. when I run BoardTesSystem.exe, after I "select version ...
  • dsun01's avatar
    dsun01
    Icon for Contributor rankContributor
    3 years ago

    yes, I will provide all information you need, thank you very much for helping.

    by the way, I just installed a win7 system. and going to test it again on my win 7. will get back to you once I have results.

    David

  • dsun01's avatar
    dsun01
    Icon for Contributor rankContributor
    3 years ago

    Hi Farabi,

    I installed a win7 and Quartus 18.1.0. now I can run

    boardtestsystem successfully.

    it is good news that my board and process is good, it is a good step forward.

    the bad news is that even on win7. I couldn't run Altera_pcie_gui.

    I have another thread in the forum.

    https://community.intel.com/t5/FPGA-SoC-And-CPLD-Boards-And/detail-of-altera-pcie-gui-stop-run/m-p/1455189#M24087

    please have a look if you are familiar with the PCie and program.

    Thank you very much.

    David