Arria 10 SoC FPGA Development Kit Not Configuring FPGA on Boot

Hi,

You can use the .sof file from the A10 GSRD.

https://releases.rocketboards.org/2022.12/gsrd/a10_gsrd/

To program .sof using the JTAG, follow the below link-

https://www.intel.com/content/www/us/en/docs/programmable/683819/22-1/programming-your-device-with-jtag-chain.html

Below Reference example-Intel FPGA Programmable Acceleration Card N3000

https://www.intel.com/content/www/us/en/docs/programmable/683190/1-3-1/using-jtag-to-load-the-sof-file.html

Also make sure to check the default switch & jumper settings.

https://www.intel.com/content/www/us/en/docs/programmable/683227/current/default-switch-and-jumper-settings.html

Let me know after trying above.

Regards

Tiwari