Forum Discussion

New Contributor

3 years ago

5AGZME5H2F35I3L Testing failures at minimum temperature ratings

To whom it may concern, I work for Lockheed Martin and I've recently been looking into an issue with one of our circuit boards. We’re experiencing an odd testing failure when running under minimum...

FakhrulA_altera

Regular Contributor

3 years ago

Hi Johnny_Toscano,

I found a KDB that may applicable to your question, please take a look:

Why does Active Serial Configuration fail at low temperatures for 28nm FPGAs ?

And, for your second question, I'm not sure we have that information, let me do further research on this and will get back to you.

Regards,

Fakhrul

Forum Discussion

5AGZME5H2F35I3L Testing failures at minimum temperature ratings

Recent Discussions

Stratix 10 Development Kit HiLo connector

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

About PCIe Daughter Cards for Agilex™ 3 FPGA and SoC C‑Series Development Kit

DE10-Lite unable to flash?

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).