Most RecentWhy does the Intel Agilex® 7 F-Tile device tx_pll_locked signal fail to assert when OSC_CLK_1 is used as the configuration clock source?Why does Intel® Quartus® report a warning message when using the "initialize memory content" option for an on-chip memory (RAM or ROM) FPGA IP?Why do I see timing violations in the F-Tile Reference and System PLL Clocks Intel FPGA IP when using Intel® Quartus® Prime Pro Edition Software version 23.2 in Intel Agilex® 7 devices?Why is my design failing when I instantiated the Configuration Clock IP in the Quartus® Prime Pro Edition Software version 24.3.1?Why doesn’t the rx_ready signal status go high when dynamic reconfiguration from high speeds (>6G) to low speeds (<=6G) is performed in the CPRI Multirate Design Example?Why does the P-Tile Debug Toolkit display lanes 8 – 15 registers in the P0 Configuration Space of a design configured in x8x8 mode ?Why is the HDMI Intel® FPGA IP status flag SCDCS register bit 0 (clock_detected) always zero when read?Why does the Audio Embed Intel® FPGA IP fail to generate with the Intel® Stratix® 10 device when using the Intel® Quartus® Prime Pro Edition Software version 22.2 ?Why does my Intel Agilex® 7 FPGA F-Tile A0 ES design fail to operate correctly when loaded from flash but works correctly when loaded from sof (JTAG)?Why does the Intel® FPGA JTAG Cable driver installation fail on Windows* operating system?
