G_H
New ContributorJoined 4 years ago
User Profile
New Contributor
User Widgets
Contributions
Re: Error (209027) Verification failed
Hi thanks for your reply. unfortunately it didn't help. i also try to erase the data and programming it again (same file of course). both, erase and programming was pass successfully and then i try again to do the verification check and its failed again. only when i unchecked the CRC check option, i pass successfully. it is the only solution i found till now. also, i run it on CMD. i try different type of verification command (according to user manual). i use : quartus_pgm -c USB-Blaster -m jtag -o vi;C:\altera\HTU_TOP.jic;EPCS16 its failed(like at the picture i uploaded) when i try to change the "vi" command, it successes: V, CV : pass successfullyRe: Error (209027) Verification failed
Hi, thank for your replay. i will try give some more information: Intel® Processor: IC FPGA 10K LE CYC-3 7GR UBGA; EP3C10U256I7; it's not PC laptop and it is not use on motherboard. the processor burn using jam file on one station which have OS win7 and its using some other jtag burn program (not quartus). the verification checked at other station, was OS winXP and one year ago we upgrade to win10 and then all the problems started. not all devices failed, most are pass successful, but several are failed. some of the failed after trying again pass the verification. we use quartus 13.0 programmer. i try to use higher quartus version such as 16.0, 17.1, 18.1, 20.1 - all same results. i am not developer, i am the test engineer of the system. also, when i try to fully burn the file, at quartus, its successful. only when i try to make verify configure its failed.Error (209027) Verification failed
Hi, I have Error (209027) Verification failed when i try to run verify configure. I succeed to pass the test after i unchecked the "check block CRCs or preform on-chip verification..." at option programmer category. I trying to understand why its happened? the program configure always successful with the same file but the verification failed. thanks, Yuri
