Forum Discussion

FMCC's avatar
FMCC
Icon for Occasional Contributor rankOccasional Contributor
3 years ago
Solved

Searching for Cyclone V GX Starter Kit Pin Table documentation

Hello Intel, Previously my class used a DE2 board to run their circuit designs. I had a PDF copy of a pin table which the students used to select which LED's, switches, etc... to use for their proj...
  • sstrell's avatar
    sstrell
    3 years ago

    So one big table instead of multiple tables with actual pin descriptions. Not sure what to say here. You could make a spreadsheet yourself if it must look like this.

sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
3 years ago

Are you missing it? The pin numbers are clearly shown starting on page 29 in that user manual (general user I/O).

  • FMCC's avatar
    FMCC
    Icon for Occasional Contributor rankOccasional Contributor
    3 years ago

    Hello sstrell,

    I looked on page 29 in the user manual. (thanks for the reference).

    I have attached the document we used in Lab for the prior Cyclone II DE2 board. I'm looking for a similar document for the Cyclone V board. This document was very useful to the students when building circuits. I would think one exists for the Cyclone V board.

    Roger

    • sstrell's avatar
      sstrell
      Icon for Super Contributor rankSuper Contributor
      3 years ago

      So one big table instead of multiple tables with actual pin descriptions. Not sure what to say here. You could make a spreadsheet yourself if it must look like this.