Forum Discussion

Matthew4's avatar
Matthew4
Icon for New Contributor rankNew Contributor
4 years ago

Cyclone II FPGA

I see that per document ADV2011 Table 1 it says that a Subscription is needed for Quartus II 13.0 SP1 software version and that the Web version is not supported anymore can anyone tell me what that actually means?

I have Cyclone II FPGA IP Modules EP201 and EP202 that I am trying to obtain software for using a Linux operating system.

4 Replies

  • Nurina's avatar
    Nurina
    Icon for Regular Contributor rankRegular Contributor
    4 years ago

    Hi,


    There are two editions of Quartus II, a subscription and web edition. The subscription edition requires you to pay for a license whereas the web edition does not. You may find the Quartus II Subscription Edition version 13.0sp1 here: https://fpgasoftware.intel.com/13.0sp1/?edition=subscription&platform=windows


    According to the ADV, you can only target the Cyclone II device using the Quartus II Subscription Edition version 13.0sp1.


    Regards,

    Nurina


    • Matthew4's avatar
      Matthew4
      Icon for New Contributor rankNew Contributor
      4 years ago

      Can you tell me how much the subscription edition costs, because I am unable to download the main Quartus Setup software 13.0 SP1 for Linux from the web? Thanks for your help.

    • Matthew4's avatar
      Matthew4
      Icon for New Contributor rankNew Contributor
      4 years ago

      Can you tell me how much the subscription edition costs, because I am unable to download the main Quartus Setup software 13.0 SP1 for Linux from the web? Thanks for your help.

    • Matthew4's avatar
      Matthew4
      Icon for New Contributor rankNew Contributor
      4 years ago

      Can you tell me how much the subscription edition costs, because I am unable to download the main Quartus Setup software 13.0 SP1 for Linux from the web? Thanks for your help.