Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Writing EPCS64 Device For Remote Update

Hi, I would like to use the Remote Update mode of Cyclone III device. I have achieved lots of things but I could not accomplish writing EPCS64. I want to write my factory image hw1+sw1 at base...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Hi Kevin and slacker, thanks for answering my questions.

I have solved the problem by using the method of Kevin, and finally I programmed my EPCS64 device with offsets. The only thing remaining is changing the bootlooder for second software.

Thanks for everything.

Best Regards,

Sincerly,

omernuz