Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Writing EPCS64 Device For Remote Update

Hi, I would like to use the Remote Update mode of Cyclone III device. I have achieved lots of things but I could not accomplish writing EPCS64. I want to write my factory image hw1+sw1 at base...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Hi Kevin and Slacker,

I have tried nios2-flash-programmer-gui to program the EPCS64 device. However, I could not find how I can program the second hw/sw pair to the base address 0x00200000.

Do I have to modify the bootlooder in order to program the second pair?

Thanks