Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

what do i need to run a FPGA chip

I bought a cyclone II EP2C20Q240 , and i want to download a simple program in it by JTAG, what do i need? NOW ,i have connect the vcc=3.3v and GND to the chip,the 50MHZ crystal is also ok; And oth...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

when i download the program with a usb-blaster by quartus II ,and click the start.it showed the error" can't access the JTAG chain".