Forum Discussion

ZC0001's avatar
ZC0001
Icon for New Contributor rankNew Contributor
4 years ago

Using MX25L12833FMI-10G to configure Cyclone V

Hi,all I now use MX25L12835FMI-10G to configure Cyclone V FPGA in AS mode.The program file can be successfully downloaded to MX25L12835FMI-10G ,but when power on the board again，the configuratio...
ZC0001's avatar
ZC0001
Icon for New Contributor rankNew Contributor
4 years ago

Hi，The program can be downloaded into the flash device "successfully" both without or with checking "verify" option. But after power up，the FPGA doesn't work in this two situation.