Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Using CRC detection with standalone FPGA

Hello, I'm planning a board with a standalone Stratis II FPGA. Since I have no external CPU on the board, I plan to use a EPCS device to configure the FPGA in AS mode. I want to employ the r...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

I think, that a re-configuration could be achived with simple logic, e.g. generating an nconfig pulse on a crcerror rising edge, if this solution would meet your requirements.